With the heat of August, I thought that nothing will beat making a small beach set photo in the chill studio. In this product shot, I am going to use three lights to simulate outdoor sunlight for a small scale product octopus attack shot. I am going to use a Miggo Splat , a small stand which kinda looks like a 5 armed octopus. Given this similarity I decided to make a light hearted photo using an action figure I own.
Gear and setup
The photograph was taken with a Canon EOS 550D and a 100mm f / 2.8 Macro lens. I used a Cactus V6 to sync the setup.
Influence of ambient light
Here you can see the influence of the ambient light in the picture. It is almost non-existent. There are some con continuous lights so I can record a view but their impact is very low. Of course, if I could kill the lights all together it would have been better.
Key light
The key light is positioned to the left of the frame, slightly behind the main subject and is quite hard. The grid ensures that the light does not hit the background. In this case the main light is simulating the sun, so it makes sense for it to very hard shadows. The reason for positioning the strobe on the left side is to help bring out the 3d nature of the model. Lastly, there is a 1/4 CTO gel to add a touch of warmth to the scene – it is a sunny day after all.
Fill Light
With only the key light the shadows are so dark that you lose quite a bit of details of the shadowed areas. This is where a fill light comes in. The light is almost perfectly aligned on axis with the lens and it provides a very soft light. This combination produce very little shadows. (the sun only casts a shadow in one direction, so I did not want to introduce a second shadow). The fill light has a 1/-Blue gel to simulate the “global light” coming from the sky. This will add a slight blue cast to the shadows.
Lighting the background
The gray background does not give the idea of a sunny scene! Instead of resorting to post-production for the cloudy sky, I used a Light Blaster. The Light Blaster projected a slide with some sky on the backdrop. (actually, it also projected some daisies, but I did not use that part for the photo)
Aside the slide, I also placed a blue gel inside the slide mount to make the projected image have a stronger color.
Adding a small reflector
Finally I added a small white reflector on the left of the frame. In the first photograph it was a bit too close to the scene and casted a small shadow (see bottom left) obstructing the key light.
Moving the reflector a few centimeters to the back the panel shadow disappeared. In many cases a reflective panel can drastically improve an image and open up shadows. Sadly, in this photograph, adding the panel did very little to light the subject and the difference is almost unnoticeable.
Final image ,after photoshop tweaks
I did a small modification to the white balance when I imported the RAW (to make it a bit warmer), and gave it a bit more contrast and saturation. Then in photoshop, I cleaned both the stand and the action figures from a dust and sand. I also boosted saturation on the sky. As far as the action figure goes, I made her skin pink, increased contrast on the eyes, and removed the joints in the legs. Here is a step by step process animated into a gif
About The Author
Carlo Orlandi is a photographer and a VFX artist based in Rome, Italy. He is also the editor of Playerdue Lighting a free lighting course in Italic. You can see more of Carlo’s work on his Flickr stream, showreel and portfolio.
